PRO – Tarmac Reviver & Sealer – Thermilate

BUY NOW SAFETY DATA SPECIFICATION DATA

Colour Range Black / Red / Green
Compositions Water Based
Pack Sizes 20 L
Touch Dry 1 – 2 h
Recoatable 4 h
Coverage 2.5 – 5 m²/l
Finish Matt
VOC Low

Description

PRO TARMAC REVIVER & SEALER is our latest edition to our already well established PRO Range. Available in Black, Red, Green. Unlike cheap bitumen products available in DIY shops, PRO Tarmac Sealer will totally rejuvenate your drive and replaces lost resins and colour from the tarmac. Coverage 40-60 sqm for 20L on one coat application. It is suitable for driveways, paths, car parks, etc. Since the product is UV resistant it minimises deterioration and provide a protection.


Benefits
  • Environmental friendly product.
  • Protects re-growth of moss and algae.
  • Resistant to staining.
  • Waterproofs to reduce stone loss and fretting.
  • Totally durable and restores colour loss.
  • Superior to artificial tarmac paint.

Preparation
Remove loose or flaking material. Make sure the surface is. clean (no dirt or grease) and dry. Seal: If new, bare and absorbent surface, seal with this product, thinned 10% with water.

Paint
Stir to ensure paint is completely mixed. Dry: Apply 2 coats with a brush or roller, leave 2-4 hours between coats. Do not apply in very damp or humid conditions or extreme temperatures. TIP: if the colour change is strong, more coats may be required.

Clean
Remove paint from the brush or roller with a cloth and then wash with water Store: Store the paint in dry conditions and protect from any extreme temperatures.