PRO – Fungicidal Wash – Thermilate

BUY NOW SAFETY DATA SPECIFICATION DATA

Colour Range N/A
Compositions Water Based
Pack Sizes 1 L
Touch Dry 2 h
Recoatable N/A
Coverage 7 m²/l
Finish N/A
VOC Low

Description

INSTANTLY KILLS: Moss ! Lichen! Algae! Mould! The new Thermilate PRO Anti-Fungicidal Wash contains naturally occurring fungicides found in edible vegetation together with most effective organic preservatives to provide the most sustainable solution to an age old problem. This easy, one-step system is applied* after the roof has been thoroughly jet-washed down. Simply leave to penetrate the roof tiles to kill off all roots while drying, before applying 2 coats of Thermilate PRO Insulating Roof Coating. PRO Anti-Fungicidal Wash is totally compatible with the long-release inhibitors specially formulated in PRO Roof to ensure: *Apply with hand spray or pressure pump type applicators. Do not use jet-spray.


Benefits
  • Zero fungicidal regrowth under applied Roof Coating.
  • Plant, lawn and shrub friendly.
  • Not harmful to humans and animals.
  • Each 1L tub of high-concentrate PRO Anti-Fungicidal Wash dilutes with 50L of water and covers up to 250m².

Preparation
Remove loose or flaking material. Make sure the surface is. clean (no dirt or grease) and dry. Seal: If new, bare and absorbent surface, seal with this product, thinned 10% with water.

Paint
Stir to ensure paint is completely mixed. Dry: Apply 2 coats with a brush or roller, leave 2-4 hours between coats. Do not apply in very damp or humid conditions or extreme temperatures. TIP: if the colour change is strong, more coats may be required.

Clean
Remove paint from the brush or roller with a cloth and then wash with water Store: Store the paint in dry conditions and protect from any extreme temperatures.