PRO – Exterior Textured Wall Coating (T-Flex) – Thermilate

BUY NOW SAFETY DATA SPECIFICATION DATA

Colour Range 12 Colours
Compositions Water Based
Pack Sizes 25 kg / 20 L
Touch Dry 1 – 2 h
Recoatable N/A
Coverage 1 m² / kg
Finish Textured
VOC Low

Description

PRO T-FLEX is the latest anticipated, hi-build flexible insulating and 100% acrylic water proofing textured wall coating from Thermilate. Guaranteed for 15 years, the life-long elasticity within the coating protects from flaking, blistering and tearing while concealing gaps, cracks and other imperfections in walls. T-FLEX is made with micro porous structures to ensure unrivalled breathability so water vapours escape out through walls, to prevent damaging condensation build-up while preventing water vapour entry.

WHITE CORNISH CREAM BEIGE MAGNOLIA OYSTER BUTTERMILK

 

LIGHT BLUE LIGHT GREEN ROSE TERRACOTTA SANDSTONE RED BRICK

Benefits
  • Guarantee properties remain bone-dry
  • Reduce heat loss through walls
  • Save Energy and Save Money on energy bills
  • Be resistant to contamination and ageing (from carbonation, penetration chlorides, corrosion and damaging salts – in all weather conditions)
  • Protect the environment as it is a water-based product
  • Protect from penetrating damp

Preparation
Remove loose or flaking material. Make sure the surface is. clean (no dirt or grease) and dry. Seal: If new, bare and absorbent surface, seal with this product, thinned 10% with water.

Paint
Stir to ensure paint is completely mixed. Dry: Apply 2 coats with a brush or roller, leave 2-4 hours between coats. Do not apply in very damp or humid conditions or extreme temperatures. TIP: if the colour change is strong, more coats may be required.

Clean
Remove paint from the brush or roller with a cloth and then wash with water Store: Store the paint in dry conditions and protect from any extreme temperatures.