PRO - Drive (Block Paving Sealer) – Thermilate

BUY NOW SAFETY DATA SPECIFICATION DATA

Colour Range N/A
Compositions Solvent Based
Pack Sizes 20 / 25 L
Touch Dry 1 -2 h
Recoatable 4 h
Coverage 2.5 – 5 m²/l
Finish Matt / Midsheen
VOC High

Description

PRO Drive (Block Paving Sealer). We supply a high quality block paving sealer. Our sealer for block paving and joint stabilising product are suitable for most types of block paving and cobble pavers, apart from clay pavers.


Benefits
  • Brings old paving alive.
  • Easy to apply with sprayer or roller.
  • Protects against loss of colour through UV light.
  • Resists oil and stain penetration.
  • Inhibits weed and algae growth BS5750/ISO9000 quality approved material.
  • For optimum results apply two coats.
  • Suitable for most patio slabs & block paving.

Preparation
Remove loose or flaking material. Make sure the surface is. clean (no dirt or grease) and dry.

Paint
Clean paving thoroughly with a pressure washer, remove all traces of weeds, algae stains, lichen and any other old stain. Ensure the entire area is completely dry, clean and free of debris before sealing Only refill the joints with kiln dried sand on the same day as application. Check that no sand remains on the surface of the paving. Before commencing sealing ensure that you have the correct application tools and sufficient amount of sealer to complete the task. Use a brush, roller or squeegee and apply the paving sealer as.

Clean
First remove excess material from the brush. Pour a little solvent into your vessel and place your paint brush into your solvent. Swirl and move your brush back and forth in the solvent. Continue until all of the block paving has been removed.