BUY NOW SAFETY DATA SPECIFICATION DATA

• Saves energy by reflecting and emitting heat
• High weather resistance
• Stable over temperature variations
• Non-toxic and environmentally friendly
• Ideal for waterproofing sloped roofs
• Remains intact on flexible surfaces
• Excellent crack bridging
• Exceptional film durability
• Resistant to atmospheric pollution
• Resistant to UV degradation
• Bonds well to a wide range of surfaces
• Reduces condensation and mildew resistant
• Easy to apply and fire safe
• Rapid drying for quick re-coating
• High tensile strength and elongation
• Low conductivity coating

Elastomeric is ideal for areas that will be also be subjected to moisture as it will not only reduce heat transfer, but protects against moisture ingress. Elastomeric’s waterproofing membrane makes it a popular choice to waterproof sloped roofs.

• Manufactured using the latest NanoCNB insulating technologies
• Scientifically tested and proven to reduce energy use
• Lowers roof and interior temperatures
• Monolithic – no seams
• Protects surface from UV degradation
• Reduces negative effects of Heat Island
• Reduces thermal stress and condensation
• Waterproofing membrane

Applying Elastomeric
Thermilate Technologies Elastomeric is supplied in 5 Gallon Pails and can be applied by paint brush, roller or paint pad. It can also be applied by spray equipment but the filters must be removed. For best results, two coats of Elastomeric should be applied. Elastomeric gives a very mild textured feel and produces a flat finish. For detailed method of application, contact your distributor/office.

Save money -and the environment!
Thermilate Technologies Elastomeric is an exciting, environmentally friendly coating which is manufactured using the latest Nano CNB insulating technology. When used on Thermilate Technologies PRO Elastomeric can reduce energy costs by up to 37%. Elastomeric is specially formulated for use on buildings which are subject to sustained solar heat. Elastomeric’s thermal barrier reduces heat gain making interiors more comfortable and less reliant on the use of air-conditioning. It is designed for use on:

Preparation
Remove loose or flaking material. Make sure the surface is. clean (no dirt or grease) and dry. Seal: If new, bare and absorbent surface, seal with this product, thinned 10% with water.

Paint
Stir to ensure paint is completely mixed. Dry: Apply 2 coats with a brush or roller, leave 2-4 hours between coats. Do not apply in very damp or humid conditions or extreme temperatures. TIP: if the colour change is strong, more coats may be required.

Clean
Remove paint from the brush or roller with a cloth and then wash with water Store: Store the paint in dry conditions and protect from any extreme temperatures.